PPS FORTRON 1140E7 可提供COA、COC,ROHS.MSDS.UL黄卡等等资料。
Physical PropertiesMetricEnglishComments
| Specific Gravity | 1.60 g/cc | 1.60 g/cc | ASTM D792 |
| Density | 1.65 g/cc | 0.0596 lb/in3 | ISO 1183 |
| Water Absorption | 0.020 %@Temperature 22.8 °C | 0.020 %@Temperature 73.0 °F | 24hr immersion; ASTM D570 |
| Water Absorption at Saturation | 0.020 % | 0.020 % | ISO 62 |
| Linear Mold Shrinkage, Flow | 0.0020 - 0.0030 cm/cm | 0.0020 - 0.0030 in/in | ASTM D955 |
| 0.0020 - 0.0060 cm/cm | 0.0020 - 0.0060 in/in | ISO 294-4 |
| Linear Mold Shrinkage, Transverse | 0.0040 - 0.0060 cm/cm | 0.0040 - 0.0060 in/in | ISO 294-4 |
| 0.0050 - 0.0070 cm/cm | 0.0050 - 0.0070 in/in | ASTM D955 |
|
Mechanical PropertiesMetricEnglishComments
| Hardness, Rockwell M | 100 | 100 | ISO 2039-2 |
| 103 | 103 | ASTM D785 |
| Tensile Strength at Break | 150 MPa | 21800 psi | 5mm/min; ISO 527-2/1A |
| 152 MPa | 22000 psi | ASTM D638 |
| Elongation at Break | 1.2 % | 1.2 % | 5mm/min; ISO 527-2/1A |
| 1.4 % | 1.4 % | ASTM D638 |
| Tensile Modulus | 15.7 GPa | 2280 ksi | 50mm/min; ISO 527-2/1A |
| Flexural Strength | 228 MPa | 33000 psi | ASTM D790 |
| 230 MPa | 33400 psi | ISO 178 |
| Flexural Modulus | 13.1 GPa | 1900 ksi | ASTM D790 |
| 15.0 GPa | 2180 ksi | ISO 178 |
| Izod Impact, Notched | 0.694 J/cm | 1.30 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 4.81 J/cm | 9.00 ft-lb/in | ASTM D256 |
| Izod Impact, Notched (ISO) | 7.00 kJ/m2@Temperature -30.0 °C | 3.33 ft-lb/in2@Temperature -22.0 °F | ISO 180/1A |
