美国杜邦70G15HSL 物性表物理性能额定值 (公制)额定值 (英制)测试方法密度1.25 g/cc0.0452 lb/in³DAM; ISO 1183填料含量15 %15 %DAM线性成型收缩率,Flow0.0039 cm/cm0.0039 in/inDAM; ISO 294-4机械性能额定值 (公制)额定值 (英制)测试方法抗张强度(断裂)60.0 MPa@Temperature 23.0 °C8700 psi@Temperature 73.4 °F50%RH; ISO 527110 MPa@Temperature 23.0 °C16000 psi@Temperature 73.4 °FDAM; ISO 527伸长率 (断裂)4.5 %@Temperature 23.0 °C4.5 %@Temperature 73.4 °FDAM; ISO 52721 %@Temperature 23.0 °C21 %@Temperature 73.4 °F50%RH; ISO 527拉伸模量3.50 GPa@Temperature 23.0 °C508 ksi@Temperature 73.4 °F50%RH; ISO 5275.40 GPa@Temperature 23.0 °C783 ksi@Temperature 73.4 °FDAM; ISO 527简支梁无缺口冲击强度7.10 J/cm²@Temperature 23.0 °C33.8 ft-lb/in²@Temperature 73.4 °F50%RH; ISO 179/1eU7.10 J/cm²@Temperature 23.0 °CDAM; ISO 179/1eU简支梁缺口冲击强度1.40 J/cm²@Temperature 23.0 °C6.66 ft-lb/in²@Temperature 73.4 °F50%RH; ISO 179/1eA1.40 J/cm²@Temperature 23.0 °CDAM; ISO 179/1eA热性能额定值 (公制)额定值 (英制)测试方法熔融温度263 °C505 °F10°C/min; DAM; ISO 11357-1/-3载荷下热变形温度(1.8 MPa)228 °C442 °FDAM; ISO 75-1/-2加工性能额定值 (公制)额定值 (英制)测试方法加工（熔体）温度290 °C554 °FDAM; Optimum; Blow Molding285 - 305 °C545 - 581 °FDAM; Blow Molding干燥温度100 - 110 °C212 - 230 °FDAM; Blow Molding干燥时间4.00 - 5.00 hour4.00 - 5.00 hourDAM; Blow Molding水分含量