物理性能测试条件测试方法测试结果单位熔体质量流动速率300°C/5.0kgASTMD123818g/10min熔体体积流动速率300°C/5.0kgISO113315.0cm3/10min收缩率MD:3.20mm内部方法0.88到0.94%TD:3.20mm内部方法0.95到1.0%吸水率饱和,23°CISO623.8%平衡,23°C,50%RHISO620.50%机械性能测试条件测试方法测试结果单位拉伸模量--3ASTMD6385000Mpa--ISO527-2/15000Mpa抗张强度屈服4ASTMD63888.0Mpa屈服ISO527-2/588.0Mpa断裂4ASTMD63888.0Mpa断裂ISO527-2/588.0Mpa拉伸应变屈服ISO527-2/53.0%断裂ISO527-2/53.0%弯曲模量50.0mm跨距5ASTMD7904600Mpa--6ISO1784600Mpa弯曲应力--6,7ISO178145Mpa屈服,50.0mm跨距5ASTMD790145Mpa热性能测试条件测试方法测试结果单位热变形温度0.45MPa,未退火,3.20mmASTMD648220°C0.45MPa,未退火,64.0mm跨距10ISO75-2/Bf224°C维卡软化温度--ASTMD152511,ISO306/B5011218°C--ISO306/B120220°C线形热膨胀系数MD:-40到40°CASTME831,ISO11359-24.1E-05cm/cm/°CTD:-40到40°CASTME831,ISO11359-27.4E-05cm/cm/°C电气性能测试条件测试方法测试结果单位体积电阻率ASTMD2571E+16ohms·cm介电强度1.60mm,inAirASTMD14923KV/mm1.60mm,inOilASTMD14924KV/mm相比耐漏电起痕指数CTIUL746PLC1漏电起痕指数IEC60112425V高电弧燃烧指数HAIUL746PLC0冲击性能测试条件测试方法测试结果单位简支梁缺口冲击强度823°CISO179/1eA5.0kJ/m²装有测量仪表的落镖冲击23°C,TotalEnergyASTMD376312.0J-30°CASTMD25665J/m23°CASTMD25680J/m23°C9ISO180/1A5.0kJ/m²可燃性测试条件测试方法测试结果单位UL阻燃等级0.8mm,TestingbySABICUL94V-12.0mm,TestingbySABICUL945VB5VA灼热丝易燃指数2.0mmIEC60695-2-12960°C热灯丝点火温度1.0mmIEC60695-2-13825°C