一般品种规格分类规格型号标准型L-1225LML-1225LLV-2225LL-1225YLV-2225YL-1250YLV-2250YK-1300Y耐候性L-1225ZL 100L-1225Z 100ML-1225Z 100LV-2225ZL-1250Z 100LV-2250Z挤塑用L-1250ZW光学用AD-5503阻燃型LN-2250YLN-2250ZLN-2525ZALN-2520ALN-2520HA耐摩擦磨损型LS-2250光高反射性型LD-1000RMLN-3010RMLN-3000RMLN-1010RM光扩散型ML-1102ML-1103ML-1105●玻璃纤维增强型规格型号分类规格型号标 准G-3410RG-3415RG-3420RG-3430R低异向性G-34**H超低异向性G-33**M阻燃型GN-34**RGN-3610LGN-3620LGN-3630H高阻燃型GV-34**R耐摩擦磨损型GS-34**相机用G-3110PHG-3120PHG-3130PH碳纤维增强型规格型号分类规格型号标 准B-8110RB-8120RB-8130R阻燃型BN-81**RB-41**R耐摩擦磨损型BS-81**REMI屏蔽型E-8715EN-8515NEN-8615NThe Physical Properties of Japanese Imperial PC Plastic Raw MaterialsPC is a non crystalline engineering material with particularly good impact strength, thermal stability, glossiness, antibacterial properties, flame retardancy, and pollution resistance. The notched Izod impact strength of PC is very high, and the shrinkage rate is usually 0.1%~0.2%.Chemical Properties of Japanese Imperial PC Plastic Raw MaterialsPC has good mechanical properties, but poor flow characteristics, making the injection molding process of this material more difficult. When selecting PC materials of what , the final expectations of the product should be taken as the benchmark. If the plastic parts require high impact resistance, then use PC materials with low flow rates; On the contrary, PC materials with high flow rates can be used to optimize the injection molding process.PC plastic raw material is a new type of thermoplastic, with a transparency of 90%, and is known as a transparent metal. It is rigid and has toughness, high impact strength, high dimensional stability, and a wide range of operating temperatures. It has good electrical insulation performance, heat resistance, and non-toxicity, and can be molded by injection or extrusion. PC plastic has excellent thermal properties and can be used for a long time between -100 ℃ and 130 ℃, with a embrittlement temperature below -100 ℃.Although polycarbonate has poor resistance to cracking and drug resistance, is prone to hydrolysis at high temperatures, has poor compatibility with other resins, and has poor lubrication performance, it can be modified by adding other resins or inorganic fillers to achieve excellent performance.
