PET美国杜邦FC02

商品描述价格说明联系我们规格PETmm有效成分含量聚对苯二甲酸乙二醇酯％加工定制否型号FC02厂商杜邦颜色本色牌号FC02加工级别注塑级特性耐磨 高抗冲 耐化学 高流动 耐高温 抗紫外线类型标准类规格级别玻纤增强货号U48中文名称美国杜邦 PETPolyethylene Terephthalate (PET) Advanced Engineering Plastics产品说明：Information provided by Advanced Engineering Plastics物性信息：物理性能额定值 (公制)额定值 (英制)测试方法比重1.34 g/cc1.34 g/ccASTM D792吸水率0.10 %0.10 %ASTM D570饱和吸水率0.70 %0.70 %ASTM D570机械性能额定值 (公制)额定值 (英制)测试方法洛氏硬度（M 级）9595ASTM D785洛氏硬度（R 级）120120ASTM D785肖氏硬度 (邵氏 D)8686ASTM 2240抗张强度79.3 MPa11500 psiASTM D638伸长率 (断裂)50 %50 %ASTM D638拉伸模量2.76 GPa400 ksiASTM D638弯曲强度103 MPa15000 psiASTM D790弯曲模量2.76 GPa400 ksiASTM D790抗压强度103 MPa15000 psiASTM D695压缩模量2.90 GPa420 ksiASTM D695剪切强度55.2 MPa8000 psiASTM D732悬壁梁缺口冲击强度0.267 J/cm0.500 ft-lb/inASTM D256摩擦系数0.200.20电气性能额定值 (公制)额定值 (英制)测试方法体积电阻率1.00e+16 ohm-cm1.00e+16 ohm-cmASTM D257介电常数3.0@Frequency 1.00e+6 Hz3.0@Frequency 1.00e+6 HzASTM D150介电强度15.4 kV/mm390 kV/inASTM D149耗散因数0.020@Frequency 1.00e+6 Hz0.020@Frequency 1.00e+6 HzASTM D150热性能额定值 (公制)额定值 (英制)测试方法线性热膨胀系数59.4 µm/m-°C33.0 µin/in-°FASTM D696导热系数0.259 W/m-K1.80 BTU-in/hr-ft²-°FASTM C177熔融温度254 °C490 °FASTM D3417最高工作温度, Air104 °C220 °F载荷下热变形温度(0.46 MPa)116 °C240 °FASTM D648载荷下热变形温度(1.8 MPa)79.4 °C175 °FASTM D648可燃性(UL94)HBHB材料描述测试方法FDA ComplianceyesApplication fields of DuPont PET plastic raw materials in the United States:PET is mainly used for fibers, with a small amount used for films and engineering plastics. PET fibers are mainly used in the textile industry. PET film is mainly used for electrical insulation materials, such as capacitors, cable insulation, printed circuit wiring substrates, electrode slot insulation, etc. Another application area of PET film is film substrate and baseband, such as film, X-ray film, recording tape, electronic computer tape, etc. PET films can also be made into metallized films by vacuum aluminum transfer, such as gold and silver wires, micro capacitor films, etc. Another use of PET is in blow molded products, used for packaging polyester bottles, food bottles, cosmetics bottles, bottled water bottles, and so on.Glass fiber reinforced PET is suitable for the electronic, electrical, and automotive industries. It is used for various coil frames, transformers, television sets, recorder components and casings, car lampholders, lampshades, incandescent lampholders, relays, rectifiers, etc