序号材料测试项目限值测试方法1各种塑料参考欧盟测试项目及限值要求2橡胶全面迁移10mg/dm2或60mg/kgEN 1186甲醛溶出量3 mg/kgSolvent extraction followed by analysis using UV-Vis初级芳香胺1 mg/kgDIN 55610N-亚硝胺和N-亚硝胺化合物N-亚硝胺:1μg/dm2N-亚硝胺生成物总释放量:10mg/dm2EN12868挥发性化合物VOM0.50%LFGB BfR Part Ⅱ Section Ⅵ, May 2003 and LFGB section 35 B80.30 1(EG)过氧化值N.D.French pharmacopoeia, Xth edition.3硅胶全面迁移10mg/dm2或60mg/kgEN 1186挥发性化合物VOM0.5%过氧化值AbsentFrench pharmacopoeia, Xth edition.锡0.1 mg/kg as SnSolvent extraction followed by analysis using ICP-OES4陶瓷、玻璃、水晶铅、镉溶出按产品形状分请来电咨询DGCCRF 2004-64边唇测试5搪瓷，瓷釉铅、镉、六价铬溶出按产品形状分请来电咨询DGCCRF 2004-64边唇测试6纯不锈钢基材：Cr,Ta,Nb,Zr,Mo,Ti, Al,CuCr＞13%Ta,Nb,Zr＜1%Mo,Ti,Al,Cu＜4%EPA 3050B7无涂层的钢（黑钢板）(包装用)不良元素含量：Pb, Cd, AsPb+Cd≤0.010%As≤0.030%DGCCRF 2004-648镀金属钢（镀锡板）(包装用)不良元素含量：Pb, Cd, As(镀层中)Pb＜0.010%Cd＜0.010%As＜0.030%DGCCRF 2004-649有机涂层钢(包装用)不良元素含量：Pb, Cd, AsPb+Cd≤0.010%As≤0.030%或Pb＜0.010%Cd＜0.010%As＜0.030%DGCCRF 2004-64全面迁移10mg/dm2或60mg/kg10钢（非包装用）不良元素含量：Pb, Cd, As, CoPb＜0.05%Cd＜0.1%As＜0.30%Co＜0.050%DGCCRF 镀金属的钢和不锈钢(非包装用)不良元素含量：Pb, Cd, As(镀层中)Pb＜0.050%Cd＜0.010%As＜0.030%DGCCRF 2004-64镀层为镍、铬、锌时，对应迁移量Ni:0.5mg/kgCr:5mg/kgZn:10mg/kgDGCCRF 200412有机涂层钢和不锈钢(非包装用)不良元素含量：Pb, Cd, As, CoPb＜0.05%Cd＜0.1%As＜0.30%Co＜0.050%DGCCRF 2004全面迁移10mg/dm2或60mg/kgDGCCRF 200413带涂层的铝和铝合金基材铝：Fe+Si, Ti, Cr, Zn, Cu, Mn, Mg, Ni, Sn, Pb, Tl, Be请来电咨询DGCCRF 2004-64基材铝合金：Si, Mg, Mn,Ni,Fe,Cu,Sb,Cr,Ti,Zr,Zn,Sr,Sn,As,Ta,Be,Pb,TlDGCCRF 2004-64全面迁移10mg/dm2或60mg/kgEN 118614无涂层的铝和铝合金请来电咨询DGCCRF 纯铸铁基材：Pb≤0.05%DGCCRF 带镀层的铸铁基材：Pb≤0.05%DGCCRF 2004-64镀层：Pb, Cd, AsPb＜0.050%Cd＜0.010%As＜0.030%镀层为Ni, Cr时测迁移量Ni:0.5mg/kgCr:5mg/kg17带有机涂层的铸铁基材：Pb≤0.05%DGCCRF 2004-64不良元素含量：Pb, Cd, As(镀层中)Pb＜0.050%Cd＜0.010%As＜0.030%DGCCRF 2004-64全面迁移10mg/dm2或60mg/kgEN 118618锡和锡合金成分分析：Sn,Sb, Cu≥97%Sb≤2.5%Cu≤1.5%DGCCRF 2004-64不良元素含量：Pb, Cd, AsPb＜0.050%Cd＜0.010%As＜0.030%Sb迁移量0.01mg/kg19锌不良元素含量：Pb, Cd, AsPb＜0.050%Cd＜0.010%As＜0.030%DGCCRF 2004-64Zn迁移量10mg/kg20镀白色镀层的金属和合金不良元素含量：Pb, Cd, AsPb＜0.050%Cd＜0.010%As＜0.030%DGCCRF 2004-64Ni, Pb, Cr, Zn, Cd迁移量Ni:0.5mg/kgCr:5mg/kgZn:10mg/kgPb:4mg/kgCd:0.3mg/kg